Inspection story

Triumph Tiger 900: Misfire & Head-Gasket Failure

This was a mechanical inspection done at a repair shop for a warranty company, not a pre-purchase inspection. Pre-purchase inspections are done at the seller and nothing is taken apart.

From the inspection file · Mechanical inspection

A misfire and escaping compression:
a Triumph head-gasket diagnosis.

During a mechanical inspection at a repair shop for a warranty company, this 2024 Triumph Tiger 900 had a misfire. I could see and hear compression escaping at the joint between the cylinder head and cylinder. My finding was a failed head gasket.

Red Triumph Tiger 900 photographed during the mechanical inspection done at a repair shop for a warranty company
The Triumph examined in this case. This was an mechanical inspection done at a repair shop for a warranty company, not a pre-purchase inspection.
The vehicle 2024 Triumph Tiger 900
The observationsMisfire and escaping compression
The findingFailed head gasket

What I observed.

The motorcycle had a misfire. While examining it, I could see and hear compression escaping between the cylinder head and cylinder. These were direct observations made during the inspection.

I identified a failed head gasket at that joint. The next question was whether further examination would reveal additional damage.

What a failed head gasket means.

The head gasket seals the joint between the cylinder head and cylinder. In this case, that seal had failed and compression was escaping. The misfire was also observed during the inspection.

For the owner, the useful distinction is between the fault identified during the inspection and any additional damage that would need further examination.

Close-up of the Triumph engine area examined for the compression leak
The area examined. A close-up from the inspection. The diagnosis is based on Antone’s observations, including what he could see and hear.
A second view of the Triumph engine area illuminated during inspection
A closer look. Another inspection view of the engine area. A still photograph does not reproduce the audible compression leak.

Why the limits of the finding matter.

A clear inspection account should separate what was observed, what was diagnosed and what remains to be checked. Here, the observations were a misfire and compression escaping at the head-to-cylinder joint. The diagnosis was a failed head gasket. The condition of the head and any other internal damage remained subject to removal and further inspection.

This motorcycle inspection illustrates diagnostic work. The car inspection packages linked below have a separate scope.

Customer details, VIN, license plates and repair paperwork are excluded. Published October 28, 2026.

See what I check in a mobile motorcycle inspection or read the used motorcycle buying guide.

What happens after booking

  1. Booked

    Receipt by text and email.

  2. Date set

    We text and email the inspection date.

  3. Inspection complete

    The inspector has finished; your report is being reviewed.

  4. Report ready

    We text and email a link to view your report.

Ready when you are.

What are you buying?
Review your total before paying