Buying guide · 4 min read

How to prepare an RV for an inspection

Check whether the seller’s storage site lets you see enough of the rig to make a buying decision.

Antone Hempstock · Founder, Clunker Busters
Updated Nov 2026

Identify the exact RV

Start with the year, make, model and body type. Ask whether it is a travel trailer, fifth wheel, truck camper, camper van, Class C or Class A. The type determines which chassis or running gear we examine and helps the booking system show the appropriate inspection. Ask for a photo of the manufacturer’s label and find out what equipment has been added since the unit was built. If the listing describes a conversion, request invoices or a list of the installed systems. Share the details if the RV has been parked for a long period or is still being used regularly.

Ask where it can be opened and operated

A covered storage bay may be useful for examining the interior, but the space may be too tight for slides or roof access. Ask whether the seller can move the RV to a level spot with room around it and whether the facility permits the inspection. Confirm gate hours, keys for the exterior compartments and who will attend or release access. If you’re looking at a unit parked in a rural area outside Portland, give us the actual street address and directions the seller uses. Note any access restrictions before booking so we can plan the visit with the seller.

Plan power, water and fuel

Ask whether shore power, a working battery, water and the appropriate fuel are available. Have the seller tell you which appliances can be demonstrated safely and which power sources they use. If the plumbing is winterized, say so before the appointment and ask the seller what testing they allow. A generator or appliance can require a separate setup or ventilation. We operate accessible equipment only where conditions allow and document any restrictions. If testing a particular slide, water heater or refrigerator matters to you, ask about that item directly instead of assuming the storage site can support it.

Follow up on past water damage

Ask about roof resealing, window leaks, slide seals and wall or floor repairs. A Northwest RV may have spent months in damp weather between trips. Ask how and where it was stored, including whether it sat under trees or under cover. We examine accessible roof edges, seams, openings and interior surfaces for signs of moisture or repair. If certain areas are blocked or unsafe to reach, we record the limitation. A fresh patch or sealant bead is a reason to ask for the repair history. It doesn’t tell you what’s behind the wall or how far moisture traveled.

Include the equipment that lets it move

A trailer’s tires, hitch and accessible running gear matter even if you care most about the living space. For a motorhome, ask about mileage, engine and chassis service, and whether a safe and permitted road test is possible. Ask when tires were installed and request any records for brakes, wheel bearings or suspension. We note the accessible evidence and explain where a lift or shop diagnosis would help. If you plan to tow it home, confirm vehicle and hitch ratings separately from the inspection. A set of working appliances cannot tell you whether a tire or hitch is ready for the trip.

Turn the findings into a purchase plan

Start with road and occupant safety, then price the systems you need for your first trip. Decide which items you can accept, which need an estimate, and which need a seller demonstration before the sale. Ask for written details of any promised work and confirm the equipment shown in the report will be included. If the RV could not be powered, request a setup that makes the outstanding checks possible before committing. Your photo report has plain-English findings, including what was observed and which checks still depend on additional access or testing.

Find out what comes with the RV

Ask the seller to identify the cords, adapters, remotes and keys included in the sale. If a system can only be operated with a particular accessory, ask the seller to have it ready on the day. Make a list so you can check what you receive at pickup.

What happens after booking

  1. Booked

    Receipt by text and email.

  2. Date set

    We text and email the inspection date.

  3. Inspection complete

    The inspector has finished; your report is being reviewed.

  4. Report ready

    We text and email a link to view your report.

Ready when you are.

What are you buying?
Review your total before paying