Road tests are done when safe and permitted.
A4, A5 and Q5: identify the engine generation
I start with the engine, model year and maintenance record, because “2.0T” covers different versions. Audi’s bulletin on increased oil use identifies particular 2009–2011 EA888 applications.
We use that history to ask better questions, not to declare every A4 or Q5 an oil burner. We check oil level and accessible leakage, look for warning messages and ask how often oil is added between services.
One startup and road test cannot measure consumption over a full service interval. If the seller mentions piston, ring or engine work, we want the invoice showing exactly what was replaced and why, with the vehicle identification matching the car.
Cooling leaks and evidence after warm-up
We look around accessible coolant hoses, reservoir connections, radiator areas and the pump or thermostat housing where visible. Dried residue can matter even when the ground under the Audi is clean.
We compare that visual evidence with coolant level, temperature behavior and any warning message. A recently cleaned engine compartment can make an active seep difficult to spot, so I note what we can actually see.
On a safe drive, we watch for temperature warnings and unusual heater behavior without intentionally overheating the car. An explanation that a reservoir was merely overfilled belongs in the seller’s account; it does not erase residue or a level concern from our findings.
S tronic, Tiptronic and quattro are not interchangeable
Audi uses different transmission and AWD arrangements across A3, A4, A6, Q5, Q7 and performance models. We identify the installed drivetrain before asking for service records.
During a permitted drive, we check low-speed take-up, reverse engagement, shifts and response after the gearbox warms up. A shudder or pause is documented with its circumstances, not automatically labeled a failed clutch pack.
We compare the tires and look for uneven wear that could complicate an AWD purchase. We ask for the actual transmission or coupling service invoice rather than assuming an “all fluids” note included every separate unit.
Different quattro systems require different maintenance conversations.
A6, Q7 and air-suspension equipment
A larger Audi may have more comfort equipment and optional systems than a basic A4. We test the seats, climate zones, tailgate, cameras, parking functions and suspension controls actually fitted.
On an air-suspension vehicle, I note uneven stance, warning messages and the response to permitted height changes. We do not promise that a brief test rules out an overnight air leak.
We look for damp carpets, headliner staining and visible moisture near accessible electronics. A panoramic roof that opens still needs its seals and surrounding trim examined.
Water-related symptoms can affect several systems, so I photograph the location instead of treating every stored communication code as an unrelated failed module.
S models, modifications and e-tron differences
An S4 or other performance Audi deserves questions about software tuning, intake changes, exhaust work and how the car was maintained after modification. We record visible equipment and any drivability symptom without claiming to recover every prior tune.
An e-tron needs a different approach: We look at accessible charging equipment, battery protection and warning information, while keeping battery-capacity testing outside this inspection. We do not apply gasoline-engine oil-consumption advice to an electric Audi.
On either type, body repair evidence, wheel damage, suspension behavior and cabin functions still matter. The model badge helps set the inspection plan; the actual equipment and observed condition determine the findings.
Service records that make the Audi easier to assess
We ask for oil-change history, cooling-system repairs, transmission servicing and documentation for any timing-system work relevant to the installed engine. The invoice should identify parts and dates, not simply promise that common problems were handled.
We compare supported computer codes with current warnings and road-test behavior. A history code may reflect an earlier event, while a current fault can need investigation even if the car drives smoothly.
The plain-English findings help you separate those categories. If a question requires an internal engine test, extended oil-use monitoring or specialist equipment, I say that directly so you can arrange the right follow-up before committing to an expensive purchase.